Skip to content
Same-day and next-day appointments in most areas.
Specialized Liebherr repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Liebherr Wine Cabinet FE Code: Fault Message

Error code FE
Appliance Wine Cabinet
Quick answer

FE is a fault message on the Liebherr WF 1061 wine cabinet with a freezer compartment. The manual states no cause.

Model compatibility: Liebherr display alerts can vary across series and model years, so FE may mean something different on another appliance or generation. Confirm it against your model documentation and record the full model number before acting.

Plain language

What this code means

FE is a fault shown in the temperature display; the manual gives no detail and says to contact customer service.

Where FE is documented

The WF 1061 / WFI 1061 is a multi-temperature wine cabinet that includes a freezer compartment, and its manual describes FE. The row follows the F0 to F9 entries in the troubleshooting table and gives a single instruction: a fault is present, contact customer service.

At a glance

Code FE
What it means FE is a fault shown in the temperature display of a wine cabinet with a freezer section; no cause is given.
What you can check Check whether the Alarm symbol or wine zone display is blinking, whether the freezer part shows dashes, and whether the power-failure symbol is lit. Those have separate explanations.
When to call a technician If none of those fits and the display reads FE, arrange a service visit. Give the designation, service number and serial number from the plate on the left inner wall, which shortens the process.

No cause comes with it, so it is not stated whether the wine zone or the freezer compartment is involved.

Quick checks that need no tools

  1. Look at whether the Alarm symbol or the wine zone display is blinking. The manual links blinking with a temperature that is not yet right.
  2. Look at the freezer part for dashes, which simply mean it sits above freezing.
  3. See if the power-failure symbol is lit. That indication is explained separately.

When none of these fits and the display reads FE, take the designation, the service number and the serial number from the plate on the cabinet’s left inner wall. The manual notes that these shorten the service process.

Frozen goods

If the freezer compartment has warmed, the manual’s power-failure guidance is to inspect the food, discard anything spoiled and not to put defrosted items back into the freezer.

Related codes

Other cabinets print longer lists of F and E fault codes; those are on the wine cabinet F and E codes page.

Wine cooler repair for metro areas

Owners in the Miami, New York, Houston, Los Angeles and San Diego metro areas can reach us on (844) 941-1758. Say that FE appeared on a cabinet with a freezer section and read out the plate numbers. See the wine refrigerator repair page too.

Source: Liebherr Use and Care Manual WF 1061 / WFI 1061

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this alert on your Liebherr appliance?

Book a specialist visit for a clear estimate and approval before repair work.

References

Sources & references

Ready to restore dependable Liebherr cooling?

Request repair online or call us for a clear estimate and approval before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a Repair