F and E codes on Liebherr wine cabinets are fault messages. Lists differ per manual; the instruction is always customer service.
Model compatibility: Liebherr display alerts can vary across series and model years, so F0 / F1 / F3 / F4 ... may mean something different on another appliance or generation. Confirm it against your model documentation and record the full model number before acting.
What this code means
F and E codes on a Liebherr wine cabinet mark an appliance fault; manuals list differing sets without individual meanings and refer to customer service.
Sorted by code instead of by cabinet
Liebherr wine cabinets show faults in the temperature window as a letter F or E followed by a digit. Looking at the printed manuals code by code gives this picture:
At a glance
| Code | F0 / F1 / F3 / F4 … |
|---|---|
| What it means | An F or E code on a wine cabinet signals an appliance fault; the exact set of codes differs between cabinets. |
| What you can check | Silence the beeping with the alarm key and leave the door shut. If the cabinet reads warm, check how the door closes. If the cabinet has an ice maker, an E1 to E8 value may be a menu setting rather than a fault. |
| When to call a technician | Call a technician if the reading is still wrong after an hour, or if DEMO or a stuck display appears. Have the designation and service number from the inside plate ready. |
- F1 is printed in every manual covered here.
- F0 is printed for UWT 1672, WS 40, EWTdf (troubleshooting page) and WF 1061 / WFI 1061.
- F8 belongs to the display sections of EWTdf, UWT 1682 and HWgb(w) 3300/5100/8300, to WS 17800 and, within the run F0 to F9, to WF 1061 / WFI 1061.
- F3 is listed for WS 17800 and, inside the full run F0 to F9, for WF 1061 / WFI 1061.
- E1, E2, E7 and E8 are in the display sections just named and in WS 17800; E3 and E9 are added by WS 17800.
The EWTdf manual’s own two sections do not match, so no combined master list is offered. Every entry gives the same instruction: the unit is defective, so customer service is the contact. Sensors, fans and compressors are never tied to a code.
Caution with E values
E1 to E8 are, in several manuals, choices for how long the IceMaker is supplied with water. The WF 1061 / WFI 1061 is one such cabinet. If your cabinet has no ice maker this cannot apply. A settings menu that is currently open could be showing a value you picked, not a fault.
While you wait
- Cancel the beeping with the alarm key and leave the door shut.
- If the cabinet reads too warm, check how the door closes, and call if the reading is still wrong after an hour.
- A DEMO message or a stuck display points to demo mode, described in the manuals with a route to service.
- Copy the designation and service number from the inside plate.
See also
- FE: the extra message on the freezer-compartment cabinet
- F0 to F9 on refrigerators: the standard fridge series
Wine refrigerator repair, metro coverage
We serve Liebherr wine cabinet owners in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Dial (844) 941-1758 with the code, model number and the sequence of events. More is on the wine refrigerator repair page.
Source: Liebherr Operating instructions UWT 1672; Liebherr Operating instructions EWTdf 1653/2353/3553; Liebherr Use and Care Manual WS 17800
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
- Liebherr Operating instructions multi-temperature wine cabinet UWT 1672 (7080 174-01)
- Liebherr Operating instructions multi-temperature wine cabinet EWTdf 1653/2353/3553 (7085 663-01)
- Liebherr Use and Care Manual for Wine Cooler WS 17800 (7085 359-02)
- Liebherr Use and Care Manual multi-temperature wine cabinet with freezer compartment WF 1061 / WFI 1061 (7084306-00)
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fill in the form below and we’ll confirm an appointment.