Liebherr Monolith MF 2461 Freezer Column
23 11/16" wide freezer column from the Monolith line — model notes, common issues and related Liebherr monolith refrigeration service.
Model overview
Tucked beside a pantry or laundry area, the Liebherr MF 2461 gets opened often without much thought, and that routine use is what gradually tests a freezer column. Each time the door swings open, warm air rushes in and the compressor has to recover. Over months, owners in the Miami-to-San-Diego service area may see frost building on the interior, water pooling near the base, a compressor that runs louder, or a section that no longer stays as cold as it should. Each change tells a slightly different story about the cooling system. Mentioning how often the door gets opened can be helpful. In your booking, include MF 2461, the symptom you noticed, when it started, and any code displayed.
At a glance
| Model | MF 2461 |
|---|---|
| Appliance | 23 11/16-inch Monolith freezer column |
| Common symptoms | Interior frost, water pooling near the base, louder compressor, section not staying cold |
| What you can check | Mention how often the door gets opened, then note the symptom, when it started and any code displayed. |
| When to call a technician | If frost, pooling water or compressor noise returns, a service visit lets a technician study the cooling system. |
MF 2461 is a Liebherr 23 11/16″ wide freezer column from the Monolith line. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Capacity | Freezer capacity is 11.5 cu ft (325 l). |
|---|---|
| Power | The electrical specification is 115 V, 60 Hz. |
| Installation | The ice maker requires a fixed water connection. Water pressure must be 40–90 psi. The cutout is 84 inches high, 24 inches wide and 25 inches deep. |
| Features | Four shelves are provided. The door has three racks. There are three FrostSafe drawers. The certified refrigerant is R-600a. |
| Controls | InfinitySwipe uses a 3.5-inch color touchscreen. |
| Care | Defrosting is automatic. |
What sets the MF 2461 apart
The Monolith is a 24-inch freezer column meant to sit fully integrated behind cabinet panels, with a color touchscreen called InfinitySwipe on the front. Three FrostSafe drawers and four shelves organize the 11.5 cu ft of storage, and the door adds three racks. A plumbed ice maker is the main difference from a column without a water connection, and that connection has its own pressure requirement.
Service notes for the MF 2461
Water pressure outside the 40–90 psi range is a frequent reason an ice maker underperforms, so the supply is measured before the ice module is suspected. Compressor or fan noise is compared with the defrost behavior, because automatic defrosting depends on the fan and heater running in sequence. Frost that returns in the FrostSafe drawers often traces to a door that does not seal along its height. Owners can safely check the water shutoff, confirm the cabinet is level and note the touchscreen's error text if one appears. Water leaking from the base usually means the supply fitting or the drain path under the unit.
Questions about the MF 2461
Where do I find the MF 2461 model number?
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Do you repair the Liebherr MF 2461 on site?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
What should I note before the visit?
Note how long the temperature has been off and whether the freezer side is affected too.
Common issues for this model
- Freezer frosting up or not holding temperature
- Water leaking inside or under the unit
- Compressor or fan running loud or nonstop
- Fresh-food section not cooling to the set temperature
Recommended repair service
Troubleshooting resources
Note how long the temperature has been off and whether the freezer side is affected too.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fill in the form below and we’ll confirm an appointment.