Skip to content
Same-day and next-day appointments in most areas.
Specialized Liebherr repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Blog

Why Does My Liebherr Freezer Keep Defrosting or Warming Up?

A freezer that repeatedly warms and then gets cold again is different from a freezer that simply cannot reach temperature. Intermittent warming points toward timing-related airflow, defrost, sensor, control, power, or compressor-start behavior.

A Liebherr freezer that keeps warming up and recovering is usually either responding to a setting or event, such as Sabbath mode, a power interruption or a heavy fresh-food load, or has an intermittent defrost, fan or sensor problem. Check the display for a Sabbath or other mode first. If measured temperature rises repeatedly with no explanation, book a diagnosis.

Overview

A freezer that repeatedly warms and then gets cold again is different from a freezer that simply cannot reach temperature. Intermittent warming points toward timing-related airflow, defrost, sensor, control, power, or compressor-start behavior.

This problem is easier to solve when you separate a one-time operating condition from a fault that repeats under normal use. When troubleshooting a Liebherr freezer that repeatedly warms or defrosts, verify the observable condition first and then narrow the fault path. That keeps a temporary load, door event, or setup issue from being mistaken for a failed component—and it also keeps a real intermittent problem from being hidden by repeated resets.

What can cause a freezer that keeps warming up?

1. Defrost system not terminating correctly

A fault in defrost sensing or control can keep heat active too long or leave the evaporator unable to recover efficiently.

2. Intermittent evaporator fan

A fan may stop when warm, bind on ice, or lose power intermittently, causing cabinet temperature to rise until operation returns.

3. Sensor or control intermittency

An unstable sensor signal or control board issue can make the freezer alternate between normal cooling and long warm periods.

4. Power or connection interruption

Loose supply connections, circuit issues, or brief power events can stop cooling without producing an obvious long outage.

5. Compressor start or variable-speed fault

A compressor that sometimes fails to start can allow temperature to climb, then appear normal again when it eventually runs.

Work through these checks in order

Use this order for a Liebherr freezer that repeatedly warms or defrosts so each observation gives you information for the next step.

  1. Use a min/max thermometer or temperature logger to prove the timing and size of each warm-up.
  2. Write down whether the display changes when the real freezer temperature rises.
  3. Listen for fan operation and unusual clicking during the warm phase.
  4. Check for an ice pattern that grows before each event or disappears after a full thaw.
  5. Review power events and whether the problem started after an outage or electrical work.

After these checks, let the appliance operate normally and judge whether the original problem has actually changed. A short-lived improvement after moving food, opening a door, or restarting power is not the same as a stable repair. This matters specifically for a Liebherr freezer that repeatedly warms or defrosts.

How to read the symptom pattern

A SWTNES 3010-25A community repair report described a freezer warming/defrosting while the display still indicated a cold value. That is exactly the kind of intermittent, measured-vs-display pattern that should be logged before parts are replaced.

The value of that pattern is not that another owner's repair should be copied. For a Liebherr freezer that repeatedly warms or defrosts, the symptom sequence tells you what to measure next and which broad fault paths become less likely.

Which settings and events can look like a freezer fault?

Manuals for some Liebherr models describe a Sabbath mode in which defrost cycles run on a fixed schedule regardless of door openings and alarms are switched off. After a power failure, one manual describes pressing the Alarm button to show the warmest temperature reached for about 60 seconds, and advises checking food and not refreezing it.

A quick symptom map

Pattern What it can mean Best next check
Defrost system not terminating correctly A fault in defrost sensing or control can keep heat active too long or leave the evaporator unable to recover efficiently. Use a min/max thermometer or temperature logger to prove the timing and size of each warm-up.
Intermittent evaporator fan A fan may stop when warm, bind on ice, or lose power intermittently, causing cabinet temperature to rise until operation returns. Write down whether the display changes when the real freezer temperature rises.
Sensor or control intermittency An unstable sensor signal or control board issue can make the freezer alternate between normal cooling and long warm periods. Listen for fan operation and unusual clicking during the warm phase.
Power or connection interruption Loose supply connections, circuit issues, or brief power events can stop cooling without producing an obvious long outage. Check for an ice pattern that grows before each event or disappears after a full thaw.

Use this table to triage a Liebherr freezer that repeatedly warms or defrosts, not as a parts list. If more than one row fits, correct the obvious operating condition first and then reassess the original symptom after the appliance stabilizes.

Repairs to leave to a technician

  • Do not open sealed refrigeration-system components or handle refrigerant as part of DIY work on a Liebherr freezer that repeatedly warms or defrosts.
  • Do not treat a temporary improvement after a reset as proof that a Liebherr freezer that repeatedly warms or defrosts has been repaired.
  • Do not use a generic error-code definition while diagnosing a Liebherr freezer that repeatedly warms or defrosts without checking the exact model/service documentation.
  • Do not pierce ice, liners, drain paths, or hidden panels while troubleshooting a Liebherr freezer that repeatedly warms or defrosts; sharp tools can create a much larger repair.

If resolving a Liebherr freezer that repeatedly warms or defrosts would require live-voltage measurements, internal control-board access, refrigerant work, or disassembly beyond the owner instructions, stop at the observation stage and move to model-specific service.

When should you book a diagnosis for a freezer that warms and recovers?

Arrange service rather than continuing trial-and-error if any of the following applies to a Liebherr freezer that repeatedly warms or defrosts:

  • Temperature rises repeatedly without a door/power explanation.
  • Frozen food softens between cycles.
  • Display stays normal during a measured warm event.
  • Compressor or fan fails to run during the warm phase.
  • Electrical symptoms occur.

At that point, a Liebherr freezer that repeatedly warms or defrosts needs part-level testing based on the exact model/service number and its documentation.

Common questions

Why does the freezer display show dashes?

The manual for one Liebherr model says dashes appear when the freezer is above 32 F, and that after first start it can take 3 to 5 hours before numbers show.

What does a flashing freezer display mean?

The same manual gives three explanations: a setting was just changed, the freezer is not yet cold after switch-on, or the temperature has risen several degrees. Check your own manual for your model.

Request a diagnosis

If the basic checks do not explain a Liebherr freezer that repeatedly warms or defrosts, request a diagnosis with the model/service number, measured temperatures, display state, and a short timeline of what changed. Those details let the technician reproduce the fault instead of beginning with random part replacement.

Need help with Liebherr refrigeration?

Book a specialist visit for a clear estimate and approval before repair work.

FAQ

Frequently asked questions

Keep reading

Similar articles

View all articles

Ready to restore dependable Liebherr cooling?

Request repair online or call us for a clear estimate and approval before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a Repair