WATER on a Liebherr freezer means ice production stopped for lack of water. Work through the connection, hoses and filter.
Model compatibility: Liebherr display alerts can vary across series and model years, so WATER may mean something different on another appliance or generation. Confirm it against your model documentation and record the full model number before acting.
What this code means
WATER is a water inlet fault on a Liebherr freezer: connection closed, feed interrupted or filter blocked; the IceMaker switches off.
What the message means
An ice-making Liebherr freezer can show WATER beside the fault symbol while it beeps. It reports a problem with the water reaching the IceMaker; the cooling side is not what the message is about.
At a glance
| Code | WATER |
|---|---|
| What it means | WATER is a water inlet fault on a Liebherr freezer: connection closed, feed interrupted or filter blocked; the IceMaker switches off. |
| What you can check | Open the door, press the fault symbol to stop the beeping, then open the water connection, inspect the hoses, or clean the inlet filter. Finally switch the IceMaker back on in its menu. |
| When to call a technician | If WATER returns after those steps, book a service visit. Pull the mains plug during a fault, and use a qualified plumber or water engineer for a leaking fitting or the drinking water connection. |
| Cause named by Liebherr |
|---|
| Water connection to the IceMaker not open |
| Water feed interrupted |
| Filter in the inlet hose connection blocked |
The (S)GN(es) guide gives these three and nothing else. Pressing the fault symbol to acknowledge the message also turns the IceMaker off.
Clearing it, in the manual’s order
Begin by opening the door and pressing the fault symbol; the beeping stops and the home screen returns. Close the door. Next, open the water connection, or inspect the connection and hoses against the installation chapter, or clean the inlet filter. Finally switch the IceMaker on again in its menu. Should the message reappear, contact customer service.
Ice does not come back until the water issue is fixed and the IceMaker is switched on.
Cautions
- The manufacturer is stated not to be liable for damage from a faulty fixed water connection.
- Connection to the drinking water mains is a job for a qualified water engineer.
- The guide says to pull the mains plug in case of a fault.
- A leak at a fitting calls for qualified plumbing help, not a quick fix.
Related codes
- WATER, fridge-freezer version: same message, combined appliance
- FE: a fault display with no owner steps
Freezer repair in Miami, New York, Houston and beyond
For Liebherr IceMaker problems in the Miami, New York, Houston, Los Angeles and San Diego metro areas, phone (844) 941-1758. Mention which of the three fixes you carried out. See the Liebherr freezer repair page for more.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fill in the form below and we’ll confirm an appointment.