Liebherr WF1051 Built-in Wine Cabinet and Freezer
Wine towers with a freezer usually show trouble as zones that drift or a fan that starts to rattle.
Model overview
The Liebherr WF1051 is a built-in wine cabinet and freezer tower with room for 34 bottles on wooden shelves, plus a freezer with 4.1 cu. ft. of capacity. Two wine temperature zones adjust separately, and four telescoping shelves pull out for access. A drop-down half shelf presents selected bottles, and the automatic ice maker comes installed. The stainless steel doors suit a matching kitchen run. Callers in the Miami, New York, Houston, Los Angeles and San Diego metro areas usually report zones drifting or a loud fan. Include the symptom, the full model number and any displayed code.
At a glance
| Model | WF1051 |
|---|---|
| Appliance | 24-inch built-in wine cabinet and freezer |
| Common symptoms | display or controls not responding; fan or compressor noise; condensation or frost on the back wall; zones not holding the set temperature |
| What you can check | Note which zone is off and the temperature the display shows versus a thermometer. |
| When to call a technician | If the symptom comes back after the simple checks, or you see a code, leaking water or a burning smell, book a visit. |
Specifications
| Capacity | Wine storage capacity is 34 bottles. Freezer capacity is 4.1 cu. ft. |
|---|---|
| Power | Specified electrical supply is 115 V, 60 Hz, 350 watts. |
| Features | Six wooden wine shelves include four telescoping shelves. A drop-down half shelf presents selected bottles. An automatic ice maker is factory installed. |
| Controls | Two wine temperature zones adjust independently. |
| Finish | The cabinet has stainless steel doors. |
What sets the WF1051 apart
The WF1051 uses stainless steel doors and a tower layout that pairs two wine zones with a NoFrost freezer, so the freezer runs without manual defrosting. Four of the six wooden shelves telescope, which lets you reach the back row without moving the rest. The half shelf drops forward for a presentation bottle. Two zones set separately mean reds and whites can keep their own readings, a useful split when the cabinet holds both kinds.
Service notes for the WF1051
Zones that will not hold their settings, a fan or compressor that makes noise, and condensation on the back wall are the three to check first. A technician looks at the zone sensors and the fan path before assuming the sealed system is at fault. Owners can safely confirm the door seals against the frame, keep the telescoping shelves clear of the rear vent, and avoid stacking bottles against the back panel. The ice maker and freezer share the cabinet space, so check that the freezer door closes fully before testing. Unplug the unit before moving it or reaching behind it, and note which zone has the problem.
The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking, because a single letter can change parts.
Frequently asked questions
How many bottles does the WF1051 hold?
It holds 34 bottles on six wooden shelves, four of which telescope.
How big is the freezer in the WF1051?
The freezer has 4.1 cu. ft. of capacity and sits beside the two wine zones.
Where do I find the full WF1051 model number?
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Copy every letter and digit, including the ones at the end.
Do you repair the Liebherr WF1051 at home?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
Common issues for this model
- Display or controls not responding
- Fan or compressor noise
- Condensation or frost on the back wall
- Zones not holding the set temperature
Recommended repair service
Troubleshooting resources
Note which zone is off and the temperature the display shows versus a thermometer.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fill in the form below and we’ll confirm an appointment.