Skip to content
Same-day and next-day appointments in most areas.
Specialized Liebherr repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Liebherr Fridge-Freezer FE Code: Fault Display

Error code FE
Appliance Refrigerator
Quick answer

FE on a Liebherr fridge-freezer is a fault without published detail. The manual says to contact after-sales service.

Model compatibility: Liebherr display alerts can vary across series and model years, so FE may mean something different on another appliance or generation. Confirm it against your model documentation and record the full model number before acting.

Plain language

What this code means

FE is a fault shown in the temperature display of a Liebherr fridge-freezer; the manual gives no detail and says to contact after-sales service.

What FE is

Liebherr’s BioFresh SBNes/ef operating instructions include FE in the list of troubleshooting displays, directly after F0 to F9. It is a fault indication, and the text for it is one sentence long: contact after-sales service.

At a glance

Code FE
What it means FE is a fault shown in the temperature display of a Liebherr fridge-freezer; the manual gives no detail and says to contact after-sales service.
What you can check First rule out look-alikes: a flashing power-failure indicator, DEMO, or stripes meaning the freezer part is above 0 degrees C. Otherwise keep the unit shut to hold the cold.
When to call a technician A genuine FE needs a technician, and so does DEMO mode. Do not repair the appliance or its mains cable yourself. Have the designation, service number and serial number from the type plate inside ready.

Check it is not something else

You see Manual says
Flashing power-failure indicator Power was lost for a time; separate steps apply
DEMO Demo mode is switched on; after-sales service handles it
Stripes The freezer part is above 0 °C

What to hand over

Give after-sales service the appliance designation, service number and serial number from the type plate on the left inside of the cabinet. Keep the unit shut while you wait so the food stays cold longer.

The manual states that repairs it does not describe, whether on the appliance or the mains cable, are reserved for service personnel.

Related codes

  • F0 to F9: numbered faults with the same advice
  • WATER: an IceMaker message with steps you can take

The BioFresh guide prints FE in the same troubleshooting table as the demo mode and power failure displays, so that table is where to compare them. Its answer for FE does not change: report the fault to after-sales service.

Where we repair Liebherr fridge-freezers

We handle Liebherr fridge-freezer repair across the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 941-1758 with the FE display, your model and the plate numbers; the refrigerator repair page has more.

Source: Liebherr Operating instructions BioFresh fridge/freezer SBNes/ef

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this alert on your Liebherr appliance?

Book a specialist visit for a clear estimate and approval before repair work.

References

Sources & references

Ready to restore dependable Liebherr cooling?

Request repair online or call us for a clear estimate and approval before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a Repair